2004 Polaris Sportsman 600/700 Service Manual, Page 149Get this manual
Moveable Sheave Bushing Inspection
2Inspect the Tefloncoating on the moveable sheave bushingbutton is positioned toward the solid roller pinIt is recommended to switch all buttons to the rubber vers ion during service (if needed)Moveable Sheave Bushing Inspection;
Replace the cover bushing If more brass than Teflon '" Is visible on the bushing
DRIVE CLUTCH REASSEMBLY
NOTE: It is important that the same numoor and thickness of washers are reinstalled ooneath the spider during assembtyThe Teflon bushings are se tf-I ubricatingDo not apply oil or grease to the bushings1Reassemb le drive clutch in the following sequenceBe sure the "X", or the marks that were made earlier, are aligned during each phase of assemblya) "X", or the marks that were made earlier on cover b) on spider, making sure spacer washers are installed underneath spider and positioned properly in recessc) "X", or the marks that were made earlier under weight