2004 Polaris Sportsman 600/700 Service Manual, Page 95Get this manual
ENGINE 10Lubricate connect ing rods with OW- 40 engine oil
13Install piston assemblies into cyl inder aligning the piston pin holes, to ensure proper alignment altha pistons to the connecting rods upon assembly
Partially install the piston pins into the pistons
11Install new cylinder gasket on crankcaseAlign
gasket on the dowel pins for proper gasket
NOTE: To help align the pistonsslide rod that is close to the same diameter as the wrist pin holes to properly align them in the cylinder14Position cylinder and piston assemblies onto the connecting rods and push the piston pins through the piston and connecting rods