2004 Polaris Sportsman 600/700 Service Manual, Page 75Get this manual
ENGINE ENGINE HEAD REASSEMBLY Before reassembly, clean the bolts and bolt holes with
Primer (PN 2870585) to remove any debrisThis will ensure proper sealing when installing bolts1Install the head gasket (Al on the cylinder (Bl4
Lubricate push rods (0) and install into lifterslubricate rockers (E) with engine oilInstall cylinder head on cylinderLubricate threads and top of washers underside of boll head with engine oilInstall head bolts (el
Torque to 35
4 ftIbs(47.S
sequence provided (Pg.3.9)Allow the gasket to set fo minute at this torque, then turn bolts 90" (1 4 turn) in sequenceRefer to Page 3.9 for tightening sequence