2004 Polaris Sportsman 600/700 Service Manual, Page 38Get this manual
3Reinstall drain plug
BREATHER HOSE
1Be sure breather line is routed properly and secured in placeCAUTIONMakesurelinesare not kinked or pinched
PVT DRYINGPVT DRAIN PLUG
1 Sediment Tube
NOTE: If operating the ATV in or through water, be sure to check the PVT cover and other components for water ingestionThe ATV should be checked immediately1To release any water that maybe trapped in the PVT cover, simply remove the PVT drain plug and O-ring located on the bottom of the PVT cover and let the water drain outThe PVT drain plug is shown below
NOTE: The sediment tube will require more frequent
service if the vehicle is operated in wet conditions or
al high throttle openings for extended periods
BREATHER FILTER INSPECTION
Four cycle ATV engines are equipped with breather fitterThe in -l ine filter is similar in appearance to fuel
fmer, and is visible on the left side (Location A)In-line breather filters should be installed with the