2003 Polaris Sportsman 600, 2002-2003 Polaris Sportsman 700 Service Manual, Page 230Get this manual
ELECTRICAL PROGRAM SERVICE INTERVAL CONT 2Begin entering the next service hour total by releasing and pressing the modereverse override buttonEach time the modereverse override button is pressed and released the service interval time is increased by an hourNOTE: Continuing to hold down the mode button will add to the hour total faster3When the desired hour total has been reached, stop pressing the modereverse override button and wait for the wrench icon to quit flashingOnce the wrench icon quits flashing the service hours are setIf you scroll past the intended number, hold the button down until the count turns over to At this point you can reattempt to set the number4The P.S.Ithen counts down from this total per hours of engine operation5When the number reachesthe wrench icon will flash for five seconds during vehicle start up to remind the driver that the next scheduled service is dueTo turn the P.S.Ioff, toggle to the service interval mode and press the modereverse override button for approximately seven seconds until the word OFF appears in the Rider Information CenterNOTE: If the gauge will not indicate what gear it is in and will not allow AWD operation, AWD can still be enabled by holding in the modeoverride buttonTo enter the diagnostics mode: 1Turn the key switch off and wait 10 seconds2Set the park brake and shift the transmission to neutral3Hold the modereverse override button as you turn the key switch onThe initial screen displayed looks similar to Ill1 and is referring to the software version currently installed in your instrument clusterThis information is only briefly displayed