2003 Polaris Sportsman 600, 2002-2003 Polaris Sportsman 700 Service Manual, Page 222Get this manual

2003 Polaris Sportsman 600, 2002-2003 Polaris Sportsman 700 Service Manual, Page 222

REAR CALIPER ASSEMBLY
1Install new O-rings in the slide bolt bushing holesBe sure O-ring and seal grooves are thoroughly cleaned of all residue, or piston may bind in boreApply brake fluid to piston seals and install carefully with twisting motion to ease assembly until fully seatedSeals

Caliper Slide Pin Torque: 30-35 ftlbs(41 Nm-48 Nm) O-Rings 2Carefully assemble caliper body, making sure O-rings are properly positioned in grooveTighten the caliper anvil bolts and then torque the anvil bolts evenly to 1618 ftlbs(2225 Nm)

Back to 2003 Polaris Sportsman 600, 2002-2003 Polaris Sportsman 700 Service Manual