2003 Polaris Sportsman 600, 2002-2003 Polaris Sportsman 700 Service Manual, Page 132Get this manual
BODYSTEERINGSUSPENSION A-ARM REPLACEMENT CONT 9Attach A-arm to hub strut assemblyTighten ball joint nut to 25 ftlbs(35 Nm)If cotter pin holes are not aligned, tighten nut slightly to alignInstall new cotter pin with open ends toward rear of machineBend both ends in opposite directions around nutVehicle Frame
WARNING
Upon A-arm installation completion, test vehicle at low speeds before putting into regular service
Bolt 30 ftlbs(41 Nm) Long Bushing Grease Fitting Bushing 25 ftlbs (35 Nm)