2003 Polaris Scrambler 50-90 Sportsman 90 Predator 90 Service Manual, Page 52Get this manual

2003 Polaris Scrambler 50-90 Sportsman 90 Predator 90 Service Manual, Page 52

ENGINE 6Release the cover from the viseTurn the cover over while holding the spring and shaft assembly in place, and install the washer2Remove the idle gear plate, two washers, and idle gear from the pin shaft
7Install the snap ring
NOTE: There is one washer on the inside of the idle gear and one washer on the outside of the idle gear
3Remove the washer and needle bearingCarefully remove the starter wheel from the crankshaft

8Install the kick pinion with the end of the drag spring (A) engaged in the slot (B)

Back to 2003 Polaris Scrambler 50-90 Sportsman 90 Predator 90 Service Manual