2003 Polaris Scrambler 50-90 Sportsman 90 Predator 90 Service Manual, Page 51Get this manual

2003 Polaris Scrambler 50-90 Sportsman 90 Predator 90 Service Manual, Page 51

KICK START ASSEMBLY
NOTE: This procedure is used to rewind the kick

3Grease and install the bushing in the kick shaft boss
start spring if the spring or any related components are disassembled for serviceIt is not necessary to remove the kick start lever or kick drive components to remove the engine cover
4Install the kick shaft as shown, with the edge of the gear resting on the spring hook post (A)Grasp the spring firmly with duckbill or needle nose pliers between the inner and outer spring coilsWind the spring approximately 225 degrees counterclockwise, while also rotating the gear counterclockwise into final position1Secure cover lightly in vise as shownProtect the surface of the cover with shop towel

Back to 2003 Polaris Scrambler 50-90 Sportsman 90 Predator 90 Service Manual