2001 Polaris Sportsman 400-500 DUSE and H.O. Service Manual, Page 316Get this manual

2001 Polaris Sportsman 400-500 DUSE and H.O. Service Manual, Page 316

MASTER CYLINDER INSTALLATION
1Install master cylinder on handlebarsmounting bolts to 55 inlbs(6 Nm)Torque

NOTE: To speed up the brake bleeding procedure the master cylinder can be purged of air before brake line is attachedFill with DOT3 brake fluid and pump lever slowly two to three times with finger over the outlet end to purge master cylinder of air2Place new sealing washers on each side of banjo line and torque banjo bolt to specificationTorque to 15 ftlbs(21 Nm)

Back to 2001 Polaris Sportsman 400-500 DUSE and H.O. Service Manual