2001 Polaris Sportsman 400-500 DUSE and H.O. Service Manual, Page 265Get this manual

2001 Polaris Sportsman 400-500 DUSE and H.O. Service Manual, Page 265

FINAL DRIVE
REAR DRIVE SHAFT INSTALLATION
1Slide shaft assembly into bearing carrier hub2Apply anti-seize compound to splines of shaft
3Install new lock ring and install the shaft4Lift bearing carrier into place and install bolt to upper control armTorque bolt to 35 ftlbs(48 Nm)5Install hub, flat washer, domed washer (domed side out) and nutTorque center nut to 100 ftlbsInstall new cotter pin and hub cap

Back to 2001 Polaris Sportsman 400-500 DUSE and H.O. Service Manual