2001 Polaris Sportsman 400-500 DUSE and H.O. Service Manual, Page 240Get this manual

2001 Polaris Sportsman 400-500 DUSE and H.O. Service Manual, Page 240

FINAL DRIVE
MAGNETIC COIL REMOVAL
1Remove the front drive axle as described later in this chapter2Remove the seal sleeve from the strut casting using drift punch and hammer, tapping evenly on each side until the sleeve slides off3Remove the existing coil and clean the coil wire channel, coil mount area, and the seal sleeve mounting area of all silicone and foreign matter4Disconnect the coil wires at the connector or terminal boardStrut Ribs Coil Wire Channel Seal Sleeve Mounting Area

Brake Line Clip Location

Back to 2001 Polaris Sportsman 400-500 DUSE and H.O. Service Manual