2001 Polaris Sportsman 400-500 DUSE and H.O. Service Manual, Page 223Get this manual

2001 Polaris Sportsman 400-500 DUSE and H.O. Service Manual, Page 223

DRIVEN CLUTCH DISASSEMBLYINSPECTIONEBS
CAUTION: The driven clutch must be disassembled from the helix end to lessen the chance of damage to seals in the one-way clutchReview all information below before proceeding
ONE-WAY CLUTCH PRELIMINARY INSPECTION (DRIVEN)
1With drive belt removed and transmission in neutral, hold the outer sheave and rotate the inner sheave of the driven clutch (moveable) in counterclockwise direction as shown at rightThe sheave should rotate on the shaft with only slight amount of dragThere should not be any binding or rough spotsMove Freely

Back to 2001 Polaris Sportsman 400-500 DUSE and H.O. Service Manual