2001 Polaris Sportsman 400-500 DUSE and H.O. Service Manual, Page 130Get this manual

2001 Polaris Sportsman 400-500 DUSE and H.O. Service Manual, Page 130

WATER PUMP MECHANICAL SEAL INSTALLATION
1Clean the seal cavity to remove all traces of old sealer2Place new mechanical seal in the seal drive collar, and install on the pump shaft3Screw the guide onto the end of the pump shaft4Install the washer and nut and tighten to draw seal into place until fully seated5Remove the guide adaptor using the additional nut as jam nut if necessary
WATER PUMP MECHANICAL SEAL REMOVALENGINE INSTALLED
WATER PUMP MECHANICAL SEAL REMOVAL TOOL:2872105

REPLACEMENT T-HANDLE FOR 2872105:

2872106

Back to 2001 Polaris Sportsman 400-500 DUSE and H.O. Service Manual