1985-1995 Polaris ATV and Light Utility Hauler Service Manual, Page 285Get this manual
ENGINES Magnum Engine Removal Remove:
Starter motorNote ground cable locationMark positive (+) cable mounting angle and remove cable Oil tank bolts and oil tank, securing it out of the way Oil filterCover oil filter area with shop towel10Loosen oil line hose clamps and remove oil linesNOTE: The uppermost line is the oil feed from the bottom of the tankCover both oil lines to prevent dirt from entering the line11Remove coolant tank TorxTM screws and remove tankSecure out of the way12Loosen clamp and remove coolant line from thermostat housingDrain the line into suitable containerPlug end of thermostat housing to minimize spillageNOTE: Mark the center of the engine mount studs in the frame for reference upon installation13Remove nut, ground cable and washer from the upper right engine mount and mark the location of the center of the mount stud