1985-1995 Polaris ATV and Light Utility Hauler Service Manual, Page 160Get this manual
TRANSMISSION SERVICE 23Remove the snap ring and rear drive gear (A)Remove the bolts securing the transmission housings (B)During reassembly torque these bolts to 17 ftIbs(2.3 kgm)
24Separate the case halves by lifting upward on the housing as shown and tapping with soft hammer on the brake disc shaft and the output shaft
25When the case halves have been separated to approximately this positionadjustthe housing so the inner shift arm can be removed from the shifting fork pinFinish separating the case halves