1985-1995 Polaris ATV and Light Utility Hauler Service Manual, Page 155Get this manual
TRANSMISSION SERVICE Type Reassembly To prevent binding, the input and output shafts and the shifter shaft must be installed into their respective bearing locations at the same timeApply light coating of Loctite 515 (PN 2870587) gasket eliminator to one of the case halvesReinstall the chain tightener
78Reinstall the left side cover carefully, insuring correct shaft bearing mating
10Once the shafts have entered the bearing bores, lightly tap the outer cover to fully seat the two halves11Reinstall cover retaining bolts and torque to ftIbs(.6 kgm)