1985-1995 Polaris ATV and Light Utility Hauler Service Manual, Page 143Get this manual
BRAKE SERVICE Brake Bleeding Procedure Cont1994 4x4 Models
Remove rear-most middle chain guard bolt, lock washer, flat washer (A) and spacer (B)Remove remaining guard bolts (C)Remove middle guard (D)Loosen jam nut and remove adjuster bolt (E)Remove auxiliary brake arm (F)Remove upper and lower bolts, lock washers and flat washers (G) from disk coverRemove disk cover (H)Cut cable tie securing brake line to frameRotate brake claiper assembly from o'clock position to 11 o'clock position and slide caliper upward to removeRotate moveable ramp lobe (J) to full unload positionSee illustration 4Move stationary pad (X) until flush with moveable pad and install C-clamp vise grip on caliper assemblySee illustration 2, page 3.28Remove right front C-clamp vise gripProceed to step 77