1985-1995 Polaris ATV and Light Utility Hauler Service Manual, Page 142Get this manual
BRAKE SERVICE Brake Bleeding Procedure Cont1993 350L 6x6
Remove right rear mud flap bolt from footrestRemove rear-most middle chain guard bolt (A) and spacer (8)Remove disk cover bolt and disk cover (H)Remove lower caliper mount bolt (I) and caliper shield (J)Cut cable tie securing brake line to frameRotate brake caliper assembly from o'clock position to 11 o'clock position and slide caliper upward to removeSee illustration 1Move stationary pad (X) until flush with moveable pad and instali C-clamp vise grip on caliper assemblySee illustration 2Remove right front C-clamp vise gripProceed to step 71994 Wheel Drive Models
Remove fender to disk guard screw and washer (A)Remove guard retaining bolt, lock washer and flat washer (8) and spacer (C)Remove guard (D)Remove upper and lower bolts, lock washers and flat washers (E)Remove disk cover (F)Cut cable tie securing brake line to frameRotate brake caliper assembly from o'clock positions to 11 o'clock position and slide caliper upward to removeSee illustration 3Move stationary pad (X) until flush with moveable pad and install clamp vise grip on caliper assemblySee illustration 2Remove right front C-clamp vise gripProceed to step 71994 6x6 Models