1985-1995 Polaris ATV and Light Utility Hauler Service Manual, Page 96Get this manual
BODY, STEERING AND SUSPENSION 2x4 Hub Bearing Service 2x4 Front Hub Bearing RemovalInspection
1Stop engine, place machine in gear and set parking brake2Loosen front wheel nuts slightly3Elevate and support machine under footrestframe areaCAUTION: Serious injury may result if machine tips or fallsBe sure machine is secure before beginning this service procedureWear eye protection when removing and installing bearings and seals4Remove wheel nuts and wheels5Check bearings for play by grasping hub firmly and checking for movementRotate the hubIt should rotate smoothly without binding or rough spots6Remove hub cap, cotter pin, front spindle nut, and washerRemove the hub7Rotate each bearing by hand and check for smooth rotationVisually inspect bearing and spindle for moisture, dirt, corrosion, or wearReplace bearing if moisture, dirt, corrosion, or roughness is evidentReplace spindle if worn or d
Bearing RemovalRepacking