1985-1995 Polaris ATV and Light Utility Hauler Service Manual, Page 92Get this manual
BODY, STEERING AND SUSPENSION Axle Housing and Swing Arm Removal and Inspection, Cont12Remove rear axle housing from swing arm13Remove axle from housingNOTE: Axle nuts are 34" (4.4 cm) 14Remove sprocket from axle housing 15Inspect axle housing, seals and bearingsReplace parts if necessaryCAUTION: Whenever inspection reveals worn, dam-
aged or defective parts, replacement is necessary in order to avoid serious damage to the machine or injury to the operator
16Reassemble axle housing, seals and bearings17Using all-purpose automotive chassis lube, fill housing until grease purges from seal18Apply blue Loctite to the axle nut threadsTorque nuts to 150 ft.lbs(20.7 kgm)