1985-1995 Polaris ATV and Light Utility Hauler Service Manual, Page 91Get this manual
BODY, STEERING AND SUSPENSION Axle Housing and Swing Arm Removal and Inspection 8Remove the three rear cover mounting bolts (A)NOTE: Most models will have spacers and O-rings located between the inner cover and the cover attaching pointsThe spacers are of different lengthsWhen removing and re-installing spacers and O-rings it is important to note their positions
9Move the rear cover outward, to reach the left side front swing arm boltThe swing arm pivot relies on bushings and thrust washers to prevent excessive side play and requires periodic lubrication to minimize premature wearSee page 2.43 for correct lubricant