1985-1995 Polaris ATV and Light Utility Hauler Service Manual, Page 85Get this manual
BODY, STEERING AND SUSPENSION Front Fork Service1985-86 Scrambler Models 23Reinstall the fork spring, spring seat and stopper ring into the inner tubeNOTE: The fork spring must be installed with the smaller pitch side facing upward as shownAlways use new stopper ring (spring wire circlip)Be sure the stopper ring is properly seated in the fork tube groove24Reinstall dust boot onto outer tubeDo not tighten screws yet25Reinstall fork into bracketsMake the top of the inner fork tube level with the top of the handle crown26Torque bolts under bracket and inner fork tube to 22 ftIbs(3 kgm)27Torque steering crown and inner fork tube bolts to 14 ftIbs(2 kgm)28Tighten dust boot clamps29Reinstall front fender and front wheelNOTE: When reinstalling front fender make sure breather pipes (A) are properly connected and routedUnder bracket Large Pitch