Kawasaki Prairie 360 KVF-360 Factory service manual, Page 253Get this manual
BRAKES 12-9 Master Cylinder
Master Cylinder Removal
Remove: Banjo Bolt [A] Brake Hose
Master Cylinder Clamp Bolts [B] Master Cylinder [C]
CAUTION
Brake fluid quickly ruins painted surface; any spilled fluid should be completely washed away immediately
Master Cylinder Installation
The master cylinder clamp must be installed with the "UP" mark [A] upwardsthe then the lower clamp bolt Tightenwill beupper clamp bolt first, andthe clamp after tighteningThere gap at the lower part of
Torque Master Cylinder Clamp Bolts: 8.8 N1m (0.9 kgf1m, 78 in1lb)