Kawasaki Prairie 360 KVF-360 Factory service manual, Page 222Get this manual
11-32 FINAL DRIVE Front Final Gear Case
Install: Final Gear Case Center Cover [A] Front Tighten the cover bolts following the tightening sequence as shown
Torque Front Final Gear Case Center Cover Bolts (M8) [1, 3]: 24 N1m (2.4 kgf1m, 17 ft1lb) Front Final Gear Case Center Cover Bolts (M6) [2, 4]: 9.8 N1m (1.0 kgf1m, 87 in1lb)
the AdjustGeargear backlash and tooth contact pattern (see Front Final Bevel Adjustment)a non-permanent locking agent to the tighten Applyto the specified torque in the tighteningcover bolts,[1and4]them sequencelocking agent the bearing Apply non-permanent so that the deeptorecesspinion gearoutwardholder [A], and tighten it [B] faces