Kawasaki Prairie 360 KVF-360 Factory service manual, Page 218Get this manual
11-28 FINAL DRIVE Front Final Gear Case
Variable Differential Control Cable Installation
the Lubricationcablevariable differential control cable before installationRoute the correctly according to Appendix chapter Operation with an improperly adjusted, incorrectly routed, or damaged cable could result in an unsafe operating condition
Tighten:
Torque Variable Differential Control Cable Locknut [A]: 17 N1m (1.7 kgf1m, 12 ft1lb)
variable differential control lever Check the Control Lever Position Inspection inposition (see Variable Differential Periodic Maintenance chapter)
Variable Differential Control Cable Lubrication
Whenever the variable differential control cable is removed, lubricate the cable as follows: Apply small amount of multi-purpose grease to the cable (both ends)Lubricate the cable with penetrating rust inhibitor through the pressure cable luber