Kawasaki Prairie 360 KVF-360 Factory service manual, Page 188Get this manual
10-10 WHEELSTIRES Tires
Support the wheel rim [A] on suitable stand [B] to prevent the tire from slipping off Inflate the tire until the tire beads seat on the rimMaximum Tire Air Pressure (to seat beads when cold) Front and Rear: 250 kPa (2.5 kgcm2, 36 psi)
Do not inflate the tire to more than the maximum tire air pressureOverinflation can explode the tire with possibility of injury and loss of lifesee that Check torim flangesrim lines [A] on both sides of the tire are parallel with the [B]
If the rim lines and the rim flanges are not parallel, deflate the tire, lubricate the sealing surfaces again, and reinflate the tireAfter the beads are properly seated, check for air leaksApply soap and water solution around the tire bead and check for bubblesDeflate the tire to the specified pressureCheck the tire pressure using an air pressure gauge Kawasaki provides the air pressure gauge (PN 52005-1082) with