Kawasaki Prairie 360 KVF-360 Factory service manual, Page 184Get this manual
10-6 WHEELSTIRES Wheel Alignment
on the other side of Repeat the straightedge procedure each other and to thethe vehicleNow the front wheels are parallel to center line of the vehicleFront Wheel [A] Vehicle Center Line [B] Parallel each other [C] Straightedges [D] Rear Wheels [E] Go on to the Toe-in Inspection procedure
Toe-in Inspection
Apply heavy coat of chalk or paint line near the center of the front tiresa needle nose scriber, make Using coating while turning the wheel.thin mark near the center of the chalk
front wheels on handlebar straight ahead With thelevel of the axle the ground, set thethe distance between the height, measure At the or painted lines for both front and rear of the front tiresscribed Subtract the measurement of the front from the measurement of the rear to get the toe-inIf the toe-in is not in the specified range, go on to the Toe-in Adjustment procedureToe-in of Front Wheels Standard: 20 mm (00.79 in at 1G