Kawasaki Prairie 360 KVF-360 Factory service manual, Page 171Get this manual

Kawasaki Prairie 360 KVF-360 Factory service manual, Page 171

CRANKSHAFTTRANSMISSION 9-17 Transmission

Install: [A] Guide Tighten:
Torque Shift Lever Assembly Bracket Bolts [B]: 20 N1m (2.0 kgf1m, 14 ft1lb)

lever Set the[D]assembly in the neutral position [C] while turning the tie-rod
Do not turn the shift shaft [E] when setting the lever assembly on

Turn the tie-rod until the rod [F] of the shift lever assembly contact

with the guide [G], and then the tie-rod can be turned until 18At that time, the clearance [H] which can be made between the rod and the guide is0.5 mm (00.02 inThis clearance is setting range for the neutral positionTighten:

Back to Kawasaki Prairie 360 KVF-360 Factory service manual