Kawasaki Prairie 360 KVF-360 Factory service manual, Page 114Get this manual
5-8 CONVERTER SYSTEM Torque Converter
Check: Belt Failure Detection Switch (see Switch Inspection section Drive Set the switch lever [A] to the ON mark side [B]
The failure detection system is activated when the switch is in the
ON positionThis is the normal running modeEngine rpm is limited when the switch is in the OFF positionin Electric System chapter)
bolt temporarily Tighten the No3and No.2 bolts temporarilyTighten the No.1 Press the cover toward the arrow [A], and then tighten the cover bolts following the tightening sequence as shownTorque Converter Cover Bolts: 8.8 N1m (0.9 kgf1m, 78 in1lb)