Kawasaki Prairie 360 KVF-360 Factory service manual, Page 38Get this manual
2-18 PERIODIC MAINTENANCE Periodic Maintenance Procedures
CAUTION
When cleaning the oil cooler with compressed air, be careful of the following to avoid damage to the finsKeep the air nozzle [A] over 0.5 (20 in [B] away from the oil coolerBlow air perpendicularly to the cooler coreNever blow air at an angle against the fins but straight through them in the direction of natural air flowNever shake the air nozzle at right angle against the fins; be sure to move it at level with the fins
Oil Hose and Connection Check
Remove: Cover (see Frame chapter) Left Side
Front Inner Covers (see Frame chapter) Check the oil hoses [A]If the oil hoses are frayed, cracked, or bulged, replace the oil hoseCheck that the hose is securely connected, and banjo bolts [B] and oil pipe joint nuts [C] are tightenedIf the oil hose has been sharply bent or kinked, replace the oil hoseTorque Oil Pipe Banjo Bolts: 29 N1m (3.0 kgf1m, 22 ft1lb) Oil Pipe Joint Nuts: 29 N1m (3.0 kgf1m, 22 ft1lb)