Kawasaki Prairie 360 KVF-360 Factory service manual, Page 34Get this manual
2-14 PERIODIC MAINTENANCE Periodic Maintenance Procedures Converter System
Actuator Lever (Engine Brake Control Lever) Assembly Inspection
the actuator lever assemblyActuator Lever Guide Shoe Wear Service Limit: mm (0.24 in
[A] the Measure the width areaofwidthguide [B]than the service limit, replace If the guide contact is greater
Drive Belt Inspection
Inspection of the drive belt is required at least every 90 days of vehicle use (average 12 mileday) not to exceed 1,100 mileMore frequent inspection is necessary if the vehicle is subjected to hard usage
Neglect, abuse, or failure to maintain the transmission can result in severely worn or damaged drive belt locking up the transmission and wheelsThis can cause the operator to lose control and have an accident resulting in injury or deathwidth Measure the [B] as [A] of the belt at several locations with suitable straightedge shownIf any measurements exceed the service limit, replace the beltBelt Width Standard: Service Limit: 29.8 31.0 mm (1.171.22 in