2008 Kawasaki Teryx 750 Service Manual, Page 408Get this manual
STEERING 14-13 Steering Knuckles
Install:Cotter Pins [A] New
When inserting the cotter pin, if the slots in the nut do not align with the cotter pin hole in the axle, tighten the nut clockwise [B] up to next alignmentIt should be within 30 degreeLoosen once and tighten again when the slot goes past the nearest hole
Bend the cotter pin [A] over the nut [B]
Install the removed parts (see appropriate chapter)Knuckle Bearing Removal