2008 Kawasaki Teryx 750 Service Manual, Page 405Get this manual
14-10 STEERING Steering Gear Assembly
agent: Apply non-permanent locking [A] M12,60 mm (2.36 Steering Gear Assembly Bolts in Steering Gear Assembly Bracket Bolts [B] M12,25 mm (2.36 in Install: Steering Gear Assembly [C] Damper [D] Washer [E] and Steering Gear Assembly Bolts Bracket [F] and Steering Gear Assembly Bracket Bolts Tighten:
TorqueSteering Gear Assembly Nuts [G]: 96 Nm (9.8 kgfm, 71 ftlb) tie-rod end joint Clean the tapered portion of theknuckle [B], or the[A] and the tapered hole of the steering tapers
will not fit snuglyInstall: Washers [C] (both sides, as shown in the figure) Tie-rod End Nuts [D] (both sides) Tighten: