2008 Kawasaki Teryx 750 Service Manual, Page 392Get this manual
13-18 SUSPENSION Suspension Arms
Stabilizer Installation
Install the stabilizer [A] so that the recess side [B] faces to lower side
Install: [A] Stabilizer
Dampers [B] (both sides) Stabilizer Holders [C] and Bolts (both sides) Apply non-permanent locking agent to the stabilizer holder boltsTighten:
TorqueStabilizer Holder Bolts [D]: 32 Nm (3.3 kgfm, 24 ftlb)
Install: Joints [E] (both sides) Stabilizer
Hold the joint bolt with an Allen wrench, and tighten the nut
Install:Wheels (see Wheel Installation in the WheelsTires Rear