2008 Kawasaki Teryx 750 Service Manual, Page 383Get this manual
SUSPENSION 13-9 Shock Absorbers
Front Shock Absorber Inspection
bushing [A] in the lower pivotCheck theis worn, cracked, hardened, or otherwise damIf bushing
aged, replace itCheck the needle bearing [B] and grease seals [C] in the upper pivotIf they are damaged, replace them
Front Shock Absorber Scrapping
WARNING
Since the front shock absorber contains nitrogen gas, do not incinerate or disassemble the front shock absorberBefore front shock absorber is scrapped, drill hole at point about 15 mm (0.59 in [A] up from the bottom of the cylinder to release the nitrogen gas completelyWear safety glasses when drilling the hole, as the gas may blow out bits of drilled metal when the hole opens