2008 Kawasaki Teryx 750 Service Manual, Page 365Get this manual
12-12 BRAKES Brake Pedal and Master Cylinder
Front Master Cylinder Inspection
front master Disassemble theCup and Dustcylinder (see Front Brake Master Cylinder Seal Replacement in the Periodic Maintenance chapter)Check that there are no scratches, rust or pitting on the inside of the cylinder [A] and on the outside of the pistons [B]If the cylinder or piston shows any damage, replace themInspect the primary cups [C] and secondary cups [D]If cup is worn, damaged, softened (rotted), or swollen, replace itIf fluid leakage is noted at the brake push rod, the secondary cup of the rear piston should be replacedCheck the dust cover [E] for damageIf it is damaged, replace itCheck that the relief [F] and supply [G] ports are not pluggedIf the small relief port becomes plugged, the brake shoes will drag on the drumBlow the ports clean with compressed airCheck the piston return springs [H] for any damageIf the spring is damaged, replace it
Rear Master Cylinder Removal