2008 Kawasaki Teryx 750 Service Manual, Page 256Get this manual
WHEELSTIRES 10-11 Tires
rim [A] on Support the wheelslipping offa suitable stand [B] to prevent the tire from Inflate the tire until the tire beads seat on the rimMaximum Tire Air Pressure (to seat beads, when cold) Front and Rear: 250 kPa (2.5 kgfcm, 36 psi)
WARNING
Do not inflate the tire to more than the maximum tire air pressureOverinflation can explode the tire with possibility of injury and loss of lifethe rim lines [A] on Check to see thatthe rim flanges [B]both sides of the tire are parallel with If the rim lines and the rim flanges are not parallel, deflate the tire, lubricate the sealing surfaces again, and reinflate the tireAfter the beads are properly seated, check for air leaksApply soap and water solution around the tire bead and check for bubblesCheck the tire pressure using an air pressure gaugeTire Air Pressure (when cold) Front: 60 kPa (0.6 kgfcm, 8.7 psi) the air valve capInstall the wheel (see Wheel Installation)Installoff the soap and water solution, or water on the tire, Wipedry the tire before operationand