2008 Kawasaki Teryx 750 Service Manual, Page 232Get this manual
9-16 CRANKSHAFTTRANSMISSION CrankshaftConnection Rod
If the measured crankpin diameter [A] is not less than the service limit, but does not coincide with the original diameter marking on the crankshaft, make new mark on itCrankpin Diameter Marks None: 39.984 39.992 mm (1.5742 1.57449 in39.993 40.000 mm (1.57452 1.5748 in
Crankpin Diameter Mark [B]: mark or no mark
Measure the connection rod big end inside diameter, and mark each connecting rod big end in accordance with the
inside diameterTighten the big end nuts to the specified torqueTorqueConnecting Rod Big End Cap Nuts: 34.3 Nm (3.5 kgfm, 25 ftlb)