2008 Kawasaki Teryx 750 Service Manual, Page 162Get this manual
5-40 ENGINE TOP END Cylinder and Piston
Install: Cylinder Tighten:
Install: Guide [B] Chain Apply grease to the O-ring on the oil pipe [C], and insert the pipeCylinder Wear Inspection
difference cylinder wear in different di Since there is aaside-to-sideinand front-to-back measurerections, take ment at each of the three locations (total of six measurements) shown in the figureIf any of the cylinder inside diameter measurements exceeds the service limit, replace the cylinder10 mm (0.4 in [A] 60 mm (2.4 in [B] 20 mm (0.8 in [C]
Cylinder Inside Diameter Standard: 84.994 85.006 mm (3.3462 3.3467 in, and less than 0.01 mm (0.0004 in difference between any two measurementsService Limit: 85.09 mm (3.3500 in, or more than 0.05 mm (0.0020 in difference between any two measurements