2008 Kawasaki Teryx 750 Service Manual, Page 47Get this manual
2-30 PERIODIC MAINTENANCE Periodic Maintenance Procedures
Converter Drive Belt Deflection Adjustment
Disassemble the driven pulley (see Driven Pulley Disassembly in the Converter System chapter)If the belt deflection is more than 27 mm (1.06 in, remove the spacers to decrease itThe rule-of-thumb is: 0.1 mm (0.004 in change in spacer thickness equals about 1.3 mm (0.051 in change in belt deflectionIf the adjustment cannot be done within the specified range even if the shim is removed, replace the drive beltIf the belt deflection is less than 22 mm (0.87 in, add the spacers [A] to increase itThe rule-of-thumb is: 0.1 mm (0.004 in change in spacer thickness equals about 1.6 mm (0.063 in change in belt deflection
When using the plural spacers, install the thick spacer to the movable sheave side and thin spacer to the fixed sheave sideSpacers Part No92026-0034 92026-1569 92026-1617 92026-1565 92026-1570 Thickness 0.3 mm (0.012 in 0.6 mm (0.024 in 0.8 mm (0.031 in 1.0 mm (0.039 in 1.4 mm (0.055 in