2008-2010 Kawasaki KFX450R Factory Service Manual, Page 291Get this manual

2008-2010 Kawasaki KFX450R Factory Service Manual, Page 291

10-12 WHEELSTIRES Tires
tire on the Install thetire changer.rim using suitable commercially available Lubricate the tire beads again and center the tire on the rimrim [A] on Support the wheelslipping offa suitable stand [B] to prevent the tire from Inflate the tire until the tire beads seat on the rimMaximum Tire Air Pressure (to seat beads when cold) Front and Rear: 250 kPa (2.5 kgfcm, 36 psi)

WARNING
Do not inflate the tire to more than the maximum tire air pressureOverinflation can explode the tire with possibility of injury and loss of lifesee that rim lines [A] on Check towith the rim flanges [B]both sides of the tire are parallel If the rim lines and the rim flanges are not parallel, deflate the tire, lubricate the sealing surfaces again, and reinflate the tireAfter the beads are properly seated, check for air leaksApply soap and water solution around the tire bead and check for bubblesDeflate the tire to the specified pressureCheck the tire pressure using an air pressure gauge