2005 Kawasaki KAF620 Mule 3010 Trans 4x4 Service Manual, Page 141Get this manual
CONVERTER SYSTEM 6-21 Driven Pulley
Install: Sheave [A] Movable
Spring [B] Insert the spring end into the hole C
The fixedmovable sheave assembly has several different spring locations which affect shifting characteristics of the torque converterthe ramp the fixed Install the spring[A] on[B] into thesheave shaftInsert end hole 1Fit the flat portions [C] of the ramp and shaft splines
Put the spacer [A] and circlip [B] on the rampInstall the adapter [C] and tighten the flange nut until the ramp halfway, turn the movable sheave counterclockwise 120 and hold itPush down the ramp until it is bottomed, and install the spacer and circlip