2005 Kawasaki KAF400 Mule 600 and Mule 610 4x4 Service Manual, Page 306Get this manual
14-10 STEERING Steering Knuckles
Steering Knuckle Removal
the Remove arm steering knuckle together with the frontinsuspension (see Front Suspension Arm Removal the Suspension chapter)Install suitable nut [A] on the stud of the tie-rod end joint [B] and tap the nut to free the joint from the steering knuckle [C]The steering knuckle comes off the front suspension arm [D]
Steering Knuckle Installation
the [A] Clean frontsealing surface and the tapered portionsjoint of the suspension arm joint and the tie-rod end and the tapered holes of the steering knuckle and the front suspension arm, or the tapers will not fit snugly
Grease: Front Suspension Arm Joint Boot Sealing Surfaces [A]