2005 Kawasaki KAF400 Mule 600 and Mule 610 4x4 Service Manual, Page 294Get this manual
13-10 SUSPENSION Front Suspension Arms
Front Suspension Arm Installation
sealing surface the Clean theknuckle joint andand the tapered portion offront steering the tapered hole of the
suspension arm, or the tapers will not fit snuglyInstall: Front Suspension Arm Joint Boot Sealing Surface [A]
Good [B] Bad [C]
the front suspension arm pivot bolts are tightened, When the arm joint in the steering knuckle to position the install
arm within its operating angleTighten:
TorqueFront Suspension Arm Pivot Bolts: 88.2 Nm (9.0 kgfm, 65 ftlb) Front Suspension Arm Joint Nut: 78.5 Nm (8.0 kgfm, 58 ftlb)