2005 Kawasaki KAF400 Mule 600 and Mule 610 4x4 Service Manual, Page 50Get this manual
PERIODIC MAINTENANCE 2-31 Periodic Maintenance Procedures
rear wheel cylinder with Replace the gasket to the hatched areanew one[A] Apply liquid
SealantThree Bond: 1109
Tighten:
TorqueWheel Cylinder Mounting Bolts: 12 Nm (1.2 kgfm, 106 inlb) Brake Pipe Nipple: 18 Nm (1.8 kgfm, 13 ftlb)
parts (see Install the removedchapter)Brake Panel Assembly section in the brakes the brake after drum installation BleedAir Bleeding linethe Brakes chapter)(see Brake Line in Be sure to check the brake system for good braking power, no brake drag and no fluid leakage
WARNING
Do not attempt to drive the vehicle until full brake pedal is obtainedPump the brake pedal until the wheel cylinders operate and the brake shoes are against the drumsThe brake will not function on the first application of the pedal if this is not done