2005 Kawasaki KAF400 Mule 600 and Mule 610 4x4 Service Manual, Page 45Get this manual
2-26 PERIODIC MAINTENANCE Periodic Maintenance Procedures
fluid Fill the reservoir with new brakecapthe Temporarily install fluidreservoir Change the brake 1Open bleed valveas follows: 2Pump brake pedal and hold it3Close bleed valve4Release brake pedal
Tighten:
the Repeatbrakeprevious step for each wheelthe fluid to the fluid When level in thechanging is finished, add upper reservoirAfter changing the fluid, check the brake for good braking power, no brake drag, and no fluid leakageIf necessary, bleed the air from the brake lines (see Brakes chapter)
TorqueBleed Valves: 8.0 Nm (0.82 kgfm, 71 inlb)
WARNING
If the brake pedal has soft or "spongy feeling" when it is applied, there might be air in the brake line or the brake may be defectiveSince it is dangerous to operate the vehicle under such conditions, bleed the air from the brake line immediately