2005 Kawasaki KAF400 Mule 600 and Mule 610 4x4 Service Manual, Page 37Get this manual
2-18 PERIODIC MAINTENANCE Periodic Maintenance Procedures Converter System
Drive Belt Inspection
belt Remove the driver [A] of(see Converter System chapter)Measure the width the belt at several locations with pair of suitable straightedges [B] as shownIf any measurements exceed the service limit, replace the beltBelt Width Standard: Service Limit: 26.1 27.3 mm (1.03 1.07 in 25.2 mm (0.99 in
peeling Check the belt for wear, cracks, breaks oroneIf necessary, replace the belt with new Belt [A] Crack [B] Broken [C]
Whenever the belt is replaced, inspect the drive and the
driven pulleys