2005 Kawasaki KAF400 Mule 600 and Mule 610 4x4 Service Manual, Page 23Get this manual
2-4 PERIODIC MAINTENANCE Torque and Locking Agent
The following tables list the tightening torque for the major fasteners, and the parts requiring use of non-permanent locking agent or liquid gasketL: Apply non-permanent locking agent to the threadsMO: Apply molybdenum disulfide oil (the weight ratio of the mixture between engine oil and disulfide grease is 101)O: Apply an oil to the threads, seated surface, or washerR: Replacement Parts S: Tighten the fasteners following the specified sequenceSS: Apply silicone sealant to the threadsFastener Fuel System Air Cleaner Housing Bolts Carburetor Mounting Nuts Choke Valve Screws Throttle Valve Screws Pilot Jet Pilot Jet Plug Main Jet Drain Screw Float Chamber Bolt Panel Cover Bolts Control Panel Bolt Plate Connection Bolts Control Panel Mounting Bolts Governor Arm Nut Fuel Pump Mounting Bolts Air Cleaner Housing Bolts Fuel Pump Bracket Bolt Breather Mounting Bolt Brearher Bracket Bolt Engine Top End Cylinder Head Cover Bolts Cylinder Head Bolts Engine Shroud Bolts Valve Adjusting Nut Lock Screw Rocker Arm Bolts Exhaust Pipe Clamp Nuts Muffler Clamp Nuts Muffler Mounting Bolts Converter System Drive Pulley Bolt Drive Pulley Cover Bolts Spider Weight Pin Nuts Torque kgfm 1.7 0.60 0.09 0.09 0.07 0.25 0.20 0.20 1.0 0.45 0.70 0.90 2.0 0.60 0.55 1.7 0.55 0.90 1.5 0.70 3.8 0.60 0.70 2.9 2.0 3.2 3.2 9.6 2.3 28 0.70 Remarks