2005 Kawasaki Brute Force 750 4x4i, KVF 750 4x4 ATV Service Manual, Page 284Get this manual

2005 Kawasaki Brute Force 750 4x4i, KVF 750 4x4 ATV Service Manual, Page 284

12-34 FINAL DRIVE Front Final Gear Case
Front Final Gear Case Oil Level Inspection

Park the vehicle so that it is level, both side-to-side and front-to-rear Remove the filler capCAUTION
Be careful not to allow any dirt or foreign materials to enter the gear caseoil Check the oil levelThe [A].level should come to the bottom of the filler opening If it is insufficient, first check the front final gear case for oil leakage, remedy it if necessary, and add oil through the filler openingUse the same type and brand of oil that is already in the final gear caseBe sure the O-ring is in place, and tighten the filler capApply grease to the O-ringTorqueOil Filler Cap: 29 Nm (3.0 kgfm, 22 ftlb)

Front Final Gear Case Oil Change

to the Front Final Gear Refer Maintenance chapterCase Oil Change in the Periodic

Variable Differential Control Lever Play Inspection

the Variable Differential Control Lever Refer to in the Periodic Maintenance chapterPlay Inspection